Data Filters

Once you run a report you may only want to view a sub-set of the data. Filters are used to restrict the report data you want to retrieve and see. Filter options are based on your HART license. You can set a Quick Filter to define the data you want to use.

The following topics are covered:

Set Filter

How to set a filter:

1. Run a report.
2. Right-click and select Filter, Add Filter.
   
3. The Filter dialog box will display. Select the value you want to use for the filter. See figure 1 below.
   
   Figure 1: Filter Dialog Box. Click image to enlarge.
   
   
4. Click OK.

Remove Filter

How to remove a filter:

1. Right-click and select Filter, then Remove Filter.
   
2. At the prompt "Are you sure you want to delete this filter?", select Yes.